Power Pack With Battery Back-Up

Product Description

Automatic power pack with battery back up has been specially designed to be used as reliable power source for VCB panel ( a type of circuit breaker for medium voltage job) used in substations. It acts as suitable auxiliary power supply source to protection relays. Equipped with mild steel enclosure, automatic power pack with battery back up takes maximum 8 hours to recharge batteries. This 7 kg power pack is completely protected against short circuit and over voltage. Front section of this power pack has indicators to denote battery status, output switch off mode and charge on mode for the convenience of operator. 

We deals in Industrial Power Pack with Capacitor Backup.

The power pack is used as a power source for VCB panels in substations where station battery supply is not available power packs Store the energy is backup capacitor from line connected PT and that stored energy can be used to trip / Close Circuit breakers when AC Input is not available

There are total two inputs. one Output is for stored energy and other is for non-stored.Stored output can be used when AC input is not available as long as AC input is present.

Technical Specifications:

• Input*: a) 110/230 VAC for 1 Phase b) 110/440 VAC for 3 Phase
• Output*: 110 or 30 or 24 VCD ( /-25% from no load to full load )
• Stored O/P*: 50 or 100 W sec
• Non-Stored O.P*: 50 or 100 W.
• Indication: Mains On Indication
• Mounting: Base Mountin

Dimension (in mm):

• 1 phase : 340 (L) x 160 (H) x 150 (D)
• 3 phase : 390 (L) x 200 (H) x 150 (D)

To be mentioned clearly at the time ordering